Precor EFX546 Instrukcja Obsługi Pobierz pdf (Strona 76)

C546 Elliptical Fitness Crosstrainer

Page 76

3. Unthread the ramp end cap or lift yoke from the lift motor drive screw. On version 1,2 units,

unthread and remove the leveller. (See Diagram 7.10)

4. Pull the lift motor cable out of the access hole and disconnect the lift motor cables. (See

Diagram 7.11).

5. Remove the hitch pin from the clevis pin. Remove the clevis pin from the lift motor.

Diagram 7.11 - Lift Motor Mounting

6. Remove the lift motor from the EFX.

Replacing the LIft Motor

7. Mount the replacement lift motor with the clevis and hitch pins. Thread the ramp end cap or

lift yoke onto the lift motor drive screw. Reconnect the lift motor cable and carefully push the

excess cable into the access hole. Replace the leveller.

8. Set the on/off switch in the “on” position. Calibrate the lift motor per Procedure 5.2

Hitch

Clevis

Lift Motor

Cable

Access Hole

Lift Motor

Ground Wire

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 117 118

Brak uwag

Precor EFX546 Instrukcja Obsługi Strona 76